The MacoTango Pneumatic Sanitary Quick-Clamp Ball Valve provides automated isolation in piping using hygienic-style connections.
Connection dimensions, wetted finish and seal selection matter as much as the external appearance. The ball cavity and seat arrangement must be assessed against the cleaning procedure and the risk of retained product.
Quick-clamp ends make connection geometry and gasket selection important ordering details. Pneumatic failure action and position indication can be selected to suit the process sequence.
Consider the valve for compatible food, beverage or other hygienic process-fluid duties where the documented construction meets the project requirements. Cleaning chemicals, contact time and temperature should form part of the specification.
| Control function | On/off isolation |
|---|---|
| Connection basis | Project-specific hygienic connection dimensions |
| Wetted specification | Material, surface finish and elastomer compatibility |
| Cleaning basis | Defined chemicals, time and temperature |
| Actuation | Pneumatic; actuator and failure action selected for the duty |
| Connection requirement | Quick-clamp; standard and gasket dimensions to approved drawing |
| Size and pressure class | Specified in the configuration datasheet for the selected model |
| Operating temperature | Limited by the complete material, seat, seal and actuator arrangement |
A configuration-specific PDF is not currently available. Ask for a datasheet with your process conditions and connection requirements.
For a configuration-specific quotation, send the following information:
We will confirm the final configuration and datasheet against the stated duty before order acceptance.
No. Cleanability also depends on cavities, wetted finish, seals and the cleaning cycle. Verify these details for the selected assembly.
It describes the connection style. The exact clamp dimensions, seal, wetted finish and cleaning suitability must still be specified.
Specify the required process response to air and signal loss. The actuator, spring arrangement and pneumatic circuit must be selected and checked together.
The MacoTango Pneumatic Sanitary Quick-Clamp Ball Valve provides automated isolation in piping using hygienic-style connections.
Connection dimensions, wetted finish and seal selection matter as much as the external appearance. The ball cavity and seat arrangement must be assessed against the cleaning procedure and the risk of retained product.
Quick-clamp ends make connection geometry and gasket selection important ordering details. Pneumatic failure action and position indication can be selected to suit the process sequence.
Consider the valve for compatible food, beverage or other hygienic process-fluid duties where the documented construction meets the project requirements. Cleaning chemicals, contact time and temperature should form part of the specification.
| Control function | On/off isolation |
|---|---|
| Connection basis | Project-specific hygienic connection dimensions |
| Wetted specification | Material, surface finish and elastomer compatibility |
| Cleaning basis | Defined chemicals, time and temperature |
| Actuation | Pneumatic; actuator and failure action selected for the duty |
| Connection requirement | Quick-clamp; standard and gasket dimensions to approved drawing |
| Size and pressure class | Specified in the configuration datasheet for the selected model |
| Operating temperature | Limited by the complete material, seat, seal and actuator arrangement |
© MacoTango Valve. All Rights Reserved.
