Caliber: Specified in the selected configuration datasheet
Valve Body Material: SS304, SS316, WCB
Connection: Flanged, Wafer
Sealing Material: PTFE
Applicable Medium: Water, gas, oil, acid, alkali, etc
Medium Temperture: Limited by selected materials, seat, seals and actuator
Drive mode: Pneumatic
Pressure Range: Specified in the selected configuration datasheet
The MacoTango Pneumatic Wafer Ball Valve provides automated ball-valve isolation in a short body pattern.
The compact body is useful where the available installation length is limited. The actuator and mounting bracket still need enough clearance for operation and maintenance, and the face-to-face dimension must match the piping layout.
The wafer-style body is intended for limited installation length. Pneumatic actuation adds remote switching, with brackets and accessories sized to leave room for flange bolts and service access.
Consider this design for compatible utility or process-fluid isolation on compact skids. Pipe flange compatibility, bolt access and actuator removal space should be checked before the assembly is ordered.
| Body pattern | Compact/wafer ball valve |
|---|---|
| Control function | On/off isolation |
| Valve motion | Quarter-turn |
| Installation basis | Actual face-to-face and mating-flange dimensions |
| Actuation | Pneumatic; actuator and failure action selected for the duty |
| Connection requirement | Wafer; matching flange pattern and disc/bore clearance required |
| Size and pressure class | Specified in the configuration datasheet for the selected model |
| Operating temperature | Limited by the complete material, seat, seal and actuator arrangement |
A configuration-specific PDF is not currently available. Ask for a datasheet with your process conditions and connection requirements.
For a configuration-specific quotation, send the following information:
We will confirm the final configuration and datasheet against the stated duty before order acceptance.
Not necessarily. Compare face-to-face length, flange pattern, bore and actuator clearance with the existing installation.
Its short body pattern can save axial space. Check the actual dimensions and flange compatibility for the project.
Specify the required process response to air and signal loss. The actuator, spring arrangement and pneumatic circuit must be selected and checked together.
The MacoTango Pneumatic Wafer Ball Valve provides automated ball-valve isolation in a short body pattern.
The compact body is useful where the available installation length is limited. The actuator and mounting bracket still need enough clearance for operation and maintenance, and the face-to-face dimension must match the piping layout.
The wafer-style body is intended for limited installation length. Pneumatic actuation adds remote switching, with brackets and accessories sized to leave room for flange bolts and service access.
Consider this design for compatible utility or process-fluid isolation on compact skids. Pipe flange compatibility, bolt access and actuator removal space should be checked before the assembly is ordered.
| Body pattern | Compact/wafer ball valve |
|---|---|
| Control function | On/off isolation |
| Valve motion | Quarter-turn |
| Installation basis | Actual face-to-face and mating-flange dimensions |
| Actuation | Pneumatic; actuator and failure action selected for the duty |
| Connection requirement | Wafer; matching flange pattern and disc/bore clearance required |
| Size and pressure class | Specified in the configuration datasheet for the selected model |
| Operating temperature | Limited by the complete material, seat, seal and actuator arrangement |
© MacoTango Valve. All Rights Reserved.
