Body Type: Straight-through S-type cast valve
Plug Type: Pressure-balanced plug with perforated cage
Nominal Diameter: DN25~300mm; NPS 1″~12″
Nominal Pressure: PN1.6~16.0MPa; CLASS 150~1500LB
Applicable Temperature: -196°C~550°C (Optional according to working conditions)
Type of Connection: Flange, welding, thread (applicable within 1″)
Flange Distance: According to IEC 60534
Gland Type: Bolt compression type
Sealing Gasket: Metal graphite spiral wound gasket
Packing: PTFE, flexible graphite
Actuator: Pneumatic actuator, Electric actuator
The MacoTango Multi-Hole Cage Control Valve uses cage passages to manage flow through the throttling area.
Dividing the flow into smaller passages changes jet formation and the way pressure energy is dissipated. A multi-hole cage and a multi-stage pressure-reduction cage are different arrangements; the selected trim must match the required pressure profile.
The multiple cage openings distribute flow through the trim. The number and arrangement of holes must suit the fluid and capacity requirement, particularly where the medium may contain particles.
This type is considered for gas, steam and liquid control where noise or a high pressure drop affects selection. A noise estimate requires the actual flow, pressures, temperature, pipe dimensions and measurement location.
| Nominal size | DN25–300 |
|---|---|
| Nominal pressure options | PN16–160; ASME Class 150–1500 |
| Temperature envelope | −196 to +550 °C across separately selected constructions |
| Trim | Pressure-balanced plug with a perforated cage |
| Body construction | Straight-through S-pattern cast body |
| Connections | Flanged or welded; threaded configurations limited to small sizes |
| Actuation | Pneumatic or electric; sized for the operating differential pressure |
| Rating basis | Series options are not simultaneous operating limits. Select the size, material, seat and pressure-temperature combination for the stated duty. |
For a configuration-specific quotation, send the following information:
We will confirm the final configuration and datasheet against the stated duty before order acceptance.
No. Noise depends on the duty, trim and piping. Request a prediction for the specified operating cases rather than a general decibel claim.
Only after checking particle size, concentration and passage dimensions. A trim designed for clean fluid may block in solids-bearing service.
The MacoTango Multi-Hole Cage Control Valve uses cage passages to manage flow through the throttling area.
Dividing the flow into smaller passages changes jet formation and the way pressure energy is dissipated. A multi-hole cage and a multi-stage pressure-reduction cage are different arrangements; the selected trim must match the required pressure profile.
The multiple cage openings distribute flow through the trim. The number and arrangement of holes must suit the fluid and capacity requirement, particularly where the medium may contain particles.
This type is considered for gas, steam and liquid control where noise or a high pressure drop affects selection. A noise estimate requires the actual flow, pressures, temperature, pipe dimensions and measurement location.
| Nominal size | DN25–300 |
|---|---|
| Nominal pressure options | PN16–160; ASME Class 150–1500 |
| Temperature envelope | −196 to +550 °C across separately selected constructions |
| Trim | Pressure-balanced plug with a perforated cage |
| Body construction | Straight-through S-pattern cast body |
| Connections | Flanged or welded; threaded configurations limited to small sizes |
| Actuation | Pneumatic or electric; sized for the operating differential pressure |
| Rating basis | Series options are not simultaneous operating limits. Select the size, material, seat and pressure-temperature combination for the stated duty. |
© MacoTango Valve. All Rights Reserved.
